RE: 383 cam
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 383 cam



[AD removed for archives]
-------------------------------------------------------------------
Get $1000.00 Overnight! Fast and Easy!
No Credit Checks! Many Lenders are 100% Paperless!
Let The Wizard Find the right Lender for you!
caadVJ5bOyW3Na/911PaydayAdvance
-------------------------------------------------------------------

Ben,

Did you install this cam or did the shop? Is it degreed correctly? 
Sounds like youve got a bit of a mess on your hands, but if you are 
certain its in the cam, perhaps starting from a baseline, and seeing 
where it is actually installed in terms of crankshaft rotation would be 
a good start.

Also, being its a regroung cam, making sure all the valve are opening 
the same amount would be a good idea as well.


Doc.


Ben Jr. Morgan wrote:
> 
> 
> 
> 
> My motor has just not run well, hasn't since I got it back from the 
> shop. I have been through this motor: it acts like it has no vacuum, but 
> the gauge says there is 25 at 2000, but it runs rough, and just has a 
> bad rhythm at idle. Could it be that the cam they put in it is just a 
> piece of crap??? I have been through my carburetion, valve guides, and 
> made sure the intake is sealing to the heads. All came out fine, 
> distributor too, vacuum advance and everything is working fine. I just 
> don't get it! It has to be the cam!!! Any ideas??? It was ground by a 
> place called Delta, and the moron who built my motor can't find my part 
> #, all I know is its supposed to be a slightly increased duration 
> version of the original cam.Get more from the Web.  FREE MSN Explorer 
> download : http://explorer.msn.com
> 
> [Non-text portions of this message have been removed]
> 

[AD removed for archives]
-------------------------------------------------------------------
Ben & Jerry?s® or Häagen-Dazs®?
Take our Nationwide Ice Cream Survey today! Receive a FREE* $100 
Restaurant Gift Card of your choice or $100 worth of Ben & 
Jerry?s® or Häagen-Dazs® ice cream for participating!
caadVYQbOyW3Nf/Ice Cream Research Survey
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.








Home Back to the Home of the Forward Look Network


Copyright Š The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.