Wire wheels were not offered for these cars. If you want to put them on your car, you need to match not only the bolt circle and wheel width, but the offset and the clearance hole for the hub, and be sure they will clear the brake calipers. You must also be prepared for people like me, who will be appalled at the idea (but I'm an old fuddy duddy about originality)! Dick Benjamin -----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Edward Tiede Sent: Thursday, February 03, 2005 10:13 AM To: mailing-list@xxxxxxxxxxxxxxxx; Rob_Mopar@xxxxxxxxxxx Subject: IML: RE;IML; 1967 Impereial wire wheels Hi All Need information on wire wheels for a '67 Crown convertible with the Budd disc brake system. According to the FSM the wheels size is 15 x 6JK which is a 15 inch wheel with 9/16" studs on a 5 bolt 5" stud bolt circle. Any information will be of great help. Thanks Ed Tiede/'67 convertible ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of
their respective authors.
This site contains affiliate links for which we may be
compensated.