68 Brake Rotors/Ford Swap

["Rami Eledam" <rami_68@xxxxxxxxxxx>]

Hello All and Jeff,

If you are a machinest or know one or can get to one it really isn't a big 
problem to use the Late 90's Ford Rotors.

1.  The centre hole needs to be re-machined so that the hub fits into it

2.  New holes for the hub to fit into need to be drilled in.

3.  And finally all you need to do is take off 10 thou off each rotor and 
you should be in there like swim wear.

I haven't got the part number for the rotor or what it is from but I will 
get that information within the next two days. I just finished putting the 
rotor on today and I am  ready to cruise like Tom tomorrow.

Please note this is all the steps I took to get my front rotors on and it 
fit perfectly and seems to be working fine.

Hope this helps,

P.S. I spent 40 bucks Canadian for each rotor and these rotors are very 
beefy with lots of meat on them. I hope they turn out well. I'll let you all 
know.

I'll get back to everyone with the part number and model for the rotors.

Regards,

Rami 68 4dr Crown


>From: Jeff Ingraham <jeff_ingraham@xxxxxxxxx>
>Reply-To: mailing-list@xxxxxxxxxxxxxxxx
>To: IML <mailing-list@xxxxxxxxxxxxxxxx>
>Subject: IML: 68 Brake Rotors/Ford Swap
>Date: Wed, 27 Mar 2002 09:39:33 -0800 (PST)
>
> > Hello Rami,
> >    If you can give more specific info about how you
> > accomplished the switch it
> > could help a bunch of us with the Budd Brake
> > problems!  we already know of a
> > Toyota Supra rotor swap but if the Ford swap is
> > easlier it is worth looking
> > into.
> > Thanks!
> > jeff Ingraham
> >
> > Rami Eledam wrote:
> >
> > > I just recently changed the front rotors on my 68
> > imp. I couldn;t find any
> > > original rotors so I used some new rotors off of a
> > new 90's ford models. All
> > > that was needed was some little machining. The
> > centre ring needed to be made
> > > bigger so that the hub would fit and they also
> > needed new holes for the
> > > bolts on the hub to fit into. I hope this helps
> > you out.
> > >
> > > Rami 4dr Crown
> > >
> > > >From: Jimconniemopar@xxxxxx
> > > >Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> > > >To: mailing-list@xxxxxxxxxxxxxxxx
> > > >Subject: Re: IML: 67 imp front rotors
> > > >Date: Mon, 25 Mar 2002 23:03:20 EST
> > > >
> > > >So what is the scoop on using Toyota rotors on 67
> > 68 69 Imperials. Is there
> > > >a
> > > >place we can look that up. Those are so tough to
> > find I'm sure many iml'ers
> > > >would be interested.
> > > >Jim H 67 68 converts
> > >
> > >
> >
>_________________________________________________________________
> > > Chat with friends online, try MSN Messenger:
> > http://messenger.msn.com
> > >
> > > -----------------  http://www.imperialclub.com
> > -----------------
> > > This message was sent to you by the Imperial
> > Mailing List. Please
> > > reply to mailing-list@xxxxxxxxxxxxxxxx and your
> > response will be
> > > shared with everyone. Private messages (and
> > attachments) for the
> > > Administrators should be sent to
> > webmaster@xxxxxxxxxxxxxxxx
> > > To UN-SUBSCRIBE, go to
> > http://imperialclub.com/unsubscribe.htm
> >
>
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Movies - coverage of the 74th Academy Awards�
>http://movies.yahoo.com/
>
>