Hey Bill,
If you really want to buy new wheels for your car, you could go with the
reproduction wires that are sold through Corky Coker(for one). They are
available in the correct bolt pattern. Yes they are VERY expensive, but don't
look too bad on even a '66. Also, I think that they are made to work with
tubeless radial tires.
Wheels from late forties New Yorkers and Imperials from the mid '50s will work,
but they do not have the ventilation holes for the brakes. This is crucial.
Also, some '57 and '58 Imperials have 14 inch wheels. Even though they may bolt
onto your car, you wouldn't want them.
I have had no trouble with wheels or wheel covers on any Imperials, but I don't
have a '66. I realize that '66 is a one year only style, but otherwise, I don't
know why they would have more trouble staying on the car than other years. I
suppose that the extra heavy cast parts on '66 could lead to them not being as
secure. I am only guessing here that '66 wheel covers weigh more than previous
years. The way that they are mounted on the wheel was designed for the lighter
wheel covers. All of the other years had cast parts, too, but not as much as
'66. This is only a possible explanation for the trouble that you have had.
I a combination of over 235,000 miles of driving my Imperials, I have only lost
one wheel cover. That was on the
'56. It was a replacement that I had purchased at a swap meet and didn't fully
check out before installing it on the car. I was running bias ply tires at the
time, so I am sure that radial tires has little or nothing to do with the
problem.
I have never had a rim fail. My '65 Imperial was driven over 80,000 miles with
its original rims and Perelli radial tires. I think that the rims fail if they
have become corroded. This can happen if a previous owner used "Fix A Flat" and
left the stuff in the tire for a long period. It is corrosive and will ruin the
rim. I have seen Imperial rims (and other cars) where this has happened.
If money is no object I think the reproduction original style '50s wires would
be a good alternative, as long as you store the originals someplace where they
can be replaced by a future owner.
Paul
In a message dated 7/17/2004 3:00:49 PM Eastern Daylight Time, "Wm. R. Ulman"
<twolaneblacktop@xxxxxxxxxxx> writes:
>Maybe I'm missing something here, but my first thought at seeing those
>wheels, was "What about the 5 1/2 on 5 bolt pattern". �I was under the
>impression no one made wheels, aftermarket or otherwise for our old
>Imperials. �Besides the Furd truck wheel interchangeability. �I have had
>to search hi & lo to find replacements for my '66. �I think the wheel
>ran from '60-'66, but it may have gone back as far as '58-'59. �Aside
>from the dreaded failure of the Center Carrier Bearing, or Center
>Support Bearing, either way you want to call it, I have always felt the
>Wheels, and at least the '66 hubcaps to be the Achilles Heel on these
>cars. �Wheels fail along the inner weld line from the age, and mostly
>use of radials (my experience anyway), and the hubcaps on the '66 were
>designed to become 60 m.p.h. Frisbee's of Death. �At the very least
>insurance liabilities, although for whatever reason, I don't know why,
>when they have flown, they have never hit another car, but if they did,
>there would certainly be some damage, and ensuing insurance claim. �I
>have seen some almost severe accidents barely avoided when a wheel cover
>throws off, down the highway, across lanes of traffic, cars, more scary,
>SUV's swerving to avoid hitting one. �Then of course risking life & limb
>to stop on the freeway, get out, run after, and retrieve what may be
>left of said cover, get back to the car, and merge back into 60+ m.p.h.
>traffic. �I have quite the collection of mangled covers. �The cover
>itself is not to bad, but the retaining ring, or backing, is shot.
>
>Anyway, I wonder where he got the wheels? �Who makes them? �Might they
>make some that had a little taste, style and class? �Not everyone wants
>to look like some Pimp from Pomona in their Imperial. �I for one would
>be interested in a befitting wheel replacement.
>
>I hope this has not come up previously, I have been blowing through most
>emails lately.
>
>Bill Ulman
>Seattle, WA
>'66 Crown Convertible Coupe - never to be Pimped out, or sold to become
>a low-rider if I can help it. �
>
>
>
>
>
>----------------- �http://www.imperialclub.com �-----------------
>This message was sent to you by the Imperial Mailing List. Please
>reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
>shared with everyone. Private messages (and attachments) for the
>Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>
Back to the Home of the Forward Look Network