The front clip of Imperials is welded together into one piece on 1961 through
1966 models. A body shop can remove a single fender by making a cut in a
prescribed place. The factory service manual is written to show the qualified
body shop where to cut and how to disassemble the "front clip". They did not
intend for the owner to do this in their garage.
Paul
In a message dated 8/24/2004 10:00:11 PM Eastern Daylight Time, "Greg and
Russell" <65luxuryliner@xxxxxxxxxxxxx> writes:
>I can only speak for my '65 and not a '66. �We had to remove the entire
>front clip to get to some rust on the firewall and other areas in the front
>of the car. The restoration shop owner who was doing the work told me the
>fenders did not come off separately from the rest of the front portion of
>the body. �He said they were welded together in one large 'clip'.
>
>Greg McDonnell
>'65 Crown convertible (frame-off restoration but couldn't remove the front
>fenders separately)
>----- Original Message -----
>From: "David Whitney" <david.whitney@xxxxxxxxxxxx>
>To: <mailing-list@xxxxxxxxxxxxxxxx>
>Sent: Tuesday, August 24, 2004 8:16 PM
>Subject: IML: '66 Coupe front fender removal -- FSM correct?
>
>
>>
>> Hi --
>>
>> '66 Crown Coupe body question -- my FSM refers to separate left and right
>> fenders that can be removed individually. �I fear the FSM was written by
>> someone who never actually tried to perform this operation.
>>
>> First, the hood hinge assembly must be removed to loosen two of the bolts
>> the FSM says to remove, but there's no mention of removing the hood first.
>> Second, when I examine my sheetmetal following the outline of the hood I
>> don't see a seam. �I see solid metal from the passenger side cowl all the
>> way around the front and back to the driver side cowl, like a giant "U".
>> Am I missing something?
>>
>> Thanks,
>>
>> David
>> '91 K-Imperial driver
>> '66 Crown Coupe project
>> '66 Newport 383 .030 over Eddys/Hurst/Cragars/dual exh daughter's first
>> Mopar
>>
>>
>>
>>
>> ----------------- �http://www.imperialclub.com �-----------------
>> This message was sent to you by the Imperial Mailing List. Please
>> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
>> shared with everyone. Private messages (and attachments) for the
>> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>>
>
>
>
>----------------- �http://www.imperialclub.com �-----------------
>This message was sent to you by the Imperial Mailing List. Please
>reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
>shared with everyone. Private messages (and attachments) for the
>Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>
Back to the Home of the Forward Look Network